产品参数：

模内攻牙机LFT-1K/G性能特点：
◆设计在自动连续冲模或级进冲模模内同步攻牙，性能稳定。
◆速度快最高值可达600孔/每分钟，效率高。例如一次攻6孔X80PM可达480孔每分种。
◆多向攻牙，可分为有上向下，有下向上，水平方向及独立攻牙，满足不同模具要求。
◆攻牙头可更换，一机多用，更换丝维安全迅速。
◆多孔攻牙，在不同牙距与牙距之间，同步多孔完成攻牙（最多可6孔）视牙径而定。
◆攻牙范围，公制，英制，丝锥皆可。
◆可依客户要求，提供专用攻牙机攻牙机数量无限制，单机最大可攻12孔。
◆可攻盲孔与一般通孔，尺寸精确，攻牙品质佳特点。
◆精巧外型，占模具空间小，不影响模具成本，安装设计方便。
◆各品牌丝攻均可适用。
◆设计弹性大，标准与专用机规格型号众多。

Performance characteristics：
◇The design of automatic continuous die or progressive die in the synchronization of tapping, stable performance.
◇Speed up to 600 holes / minute, high efficiency. For example, an attack on the 6 hole X80PM up to 480 holes per minute.
◇Multi direction tapping, can be divided into up and down, up and down, horizontal and independent tapping, to meet the requirements of different molds.
◇Tapping head can be replaced, the use of a machine, replacing the fibers safely and quickly.
◇Porous tapping, in the distance between the teeth and the distance between the teeth, the completion of the synchronized porous tapping (up to 6 holes) depending on the size of the teeth.
◇Tapping range, metric, inch, taps are available.
◇According to customer requirements, the number of special tapping machine tapping machine is unlimited, the largest single attack 12 holes.
◇Can be used to attack the blind hole and the general through hole, the size is accurate, tapping the good quality characteristics.
◇Compact appearance, accounting for small mold space, does not affect the cost of mold, easy installation and design.
◇Each brand can be applied to tap.
◇Design flexibility, standard and special machine specifications and models.